The gloves are supplied with the vehicle battery cable but no battery. The following text describes these various possible solutions in detail. If you want to purchase the batteries, please add them separately to the shopping cart:
The Keis G601 heated motorcycle gloves redefine the heated clothing sector. Especially as a passionate motorcyclist, these gloves give you the opportunity to turn winter, with its icy temperatures, into motorcycling season.
Not only are these motorcycle gloves heated, they are also Armored CE approved and comply with the latest PPE directive EN 13594:2015. The knuckle protection is made from a more flexible and comfortable protective material.
A 4-LAYER CONSTRUCTION
The model is composed of 4 layers: The outer protective layer, a Hipora membrane, the insulation layer and the integrated heating system, as well as a thin fleece layer that rounds it all off.
1. CE approved protective layer
The outer layer of motorcycle gloves is the necessary protective layer. It is made of leather and nylon. In addition, nylon inserts are placed in the places where you need the most freedom of movement. In addition to the high-quality leather, which is attached to both the palm and the palm, are attached over the knuckles for flexible protection. Strong double stitching, which holds the materials together, increases the protection of the gloves. Two straps also ensure a reliable hold, which on the one hand fixes the glove at wrist height and on the other hand uses a Velcro fastener to ensure an exact transition between sleeve and glove.
2. Waterproof membrane
The second layer is the Hipora membrane, which is directly connected to the protective layer and thus leaves no gap for wet and cold. The membrane is waterproof and breathable.
3. Insulation layer
The insulation layer, consisting of 3M Thinsulate, forms the third layer. Due to its extremely thin design, it ensures that the sensitivity and fine motor skills of all hand movements remain and are not restricted by thick layers.
4. Heating system
The heating system is integrated into the fourth layer. Finished with a final layer of fleece, it envelops the hands and provides reliable warmth that spreads across the entire surface of the hand to the fingertips. The heat is regulated by the snaps on the outer layer and can be set to one of 3 heat levels. The gloves are each separately adjustable. The push button also serves as an on/off button.
The motorcycle gloves are constructed in such a way that the inner lining remains reliably inside the glove, even when it is wet, and cannot be pulled out when you take it off. They were developed by motorcyclists for motorcyclists.
The G601 motorcycle gloves are designed with thermal technology that warms the entire upper palm to the fingertips. This enables optimal heat distribution throughout the hand and improved blood circulation. With these motorcycle gloves you will never get cold hands again!
Thanks to the dual-power technology, there are three power supply options. These would be:
1. Powered by vehicle battery
If you want to power your motorcycle gloves from a vehicle battery, you have several options to choose from.
On the one hand, charging via the supplied 12V vehicle battery cable in the form of a "Y", which is connected directly to the vehicle battery.
On the other hand with one of the following cable options: 12V cigarette lighter cable, KET connection, SAE connection (please add them separately in the shopping cart from the accessories section).
2. Power supply by the two lithium battery pack 4A for gloves
Please add the battery pack 4A separately in the shopping cart.
This battery pack consists of two small batteries, each delivering 4A. Each battery is placed in the designated pocket of the respective glove and connected to the existing connection next to the pocket. This solution enables wireless freedom of movement, even independently of the motorcycle. The batteries ensure a power supply for up to three hours, depending on the outside temperature and the set heat level.
3. Powered by a compact Lithium Li-ion 5.2A battery
Please add the 5.2A battery separately in the shopping cart.
This battery powers both gloves at the same time. It is connected to a "Y" cable which runs through both sleeves to the gloves and is connected there. The battery is stowed either in a jacket pocket or in the belt pouch supplied. The battery guarantees a power supply for up to six hours, depending on the outside temperature and the set heat level.
The "Y" cable is always supplied with each pair of gloves. It is required for the power supply from the 5.2A battery or from the vehicle battery.
The heated G601 motorcycle gloves can be connected directly to a power source (battery or vehicle battery) or combined with the Keis jacket (power connection integrated in the sleeves) or the Keis vest (power connection integrated in the armpit area). The coupling makes it possible to run the heatable products from a single main power source.
No additional cable is required for the jacket, as the cables are integrated in the sleeves. However, for the vest you will need a separate pair of connection cables.
Bonus: If you order a vest and a pair of undergloves in one, we will give you the pair of connection cables that connect the gloves directly to the vest for free.
SCOPE OF DELIVERY
- 1 pair of heated motorcycle gloves G601
- 1 12V vehicle battery cable
- 1 "Y" connection cable
- 1 instruction manual in German
- Armored CE tested motorcycle gloves comply with the latest PPE directive EN 13594:2015
- Outer layer consists of leather and nylon, as well as additional
- Waterproof and breathable Hipora membrane
- Thinsulate insulation layer
- Heating system over the entire surface of the hand to the fingertips
- Comfortable fit
- Dual power technology for power supply
- Current 1.6A, power 19.2W
How do I find the right size?
Measure the circumference of your palm in the area above the thumb and below the fingers (as shown in the picture). Then select the size that applies to you from the table.
If you are not satisfied with your selected size of the product, we will of course enable you to exchange it without any problems and free of charge to Germany, Austria, Luxembourg, France, Belgium and the Netherlands. For all other countries, DPD/DHL delivery costs will apply.
In this case, simply send us an email with all the necessary information, and we will contact you back quickly.